Guia docente 2022_23
Escola de Enxeñaría Industrial
Grado en Ingeniería Mecánica
 Subjects
  Fundamentals of manufacturing systems and technologies
   Assessment
  Description Qualification Training and Learning Results
Objective questions exam Type A test (for all students -75% final grade-)
The character of this test is written and face-to-face, it is compulsory for all students, with or without continuous evaluation.
It will be composed of 25 multiple choice questions on the theoretical and practical content.
The evaluation of the multiple choice test will be carried out on a scale of 7.5 points, which represents 75% of the total mark, being necessary to obtain at least 2.5 points, so that together with the practical tests it is possible to obtain the minus 5 points and pass the subject. The grade for this test will be obtained by adding 0.3 points for each question answered correctly and 0.1 points will be deducted if the question is answered incorrectly. Blank questions do not score.

75 B3
C15
D8
D9
D10
Laboratory practice Type B test (continuous assessment -15% final grade-):
A test to be carried out in the practical class schedule consisting of carrying out a numerical control program that mechanizes the piece that is presented to you.

Type C test (continuous assessment -10% final grade-):
A written test or work to be proposed by the teacher throughout the semester. This test will be valued with a maximum of 1 point, 10% of the final grade.
The notes of tests A, B and C will be added, in order to obtain at least 5 points and pass the subject.

Type D test (waiver of continuous assessment, 25% final grade):
Resolution of various practical problems, whose value will be 25% of the final grade, that is, a maximum of 2.5 points. It is necessary to obtain a minimum of 1 point in this test so that the qualification can be added to that of the type A test and to be able to obtain at least 5 points to pass the subject.
This type D test will be carried out exclusively by students who have been granted the waiver of continuous assessment, and it will be carried out on the same day that the compulsory type A test is carried out, after it has finished.

25 C15
D2
D8
D9
D10
D17
D20
 
Other comments on the Evaluation

PASSED

Qualified students through continuous evaluation:

To pass this subject it is necessary to obtain at least 5 points by adding the score of the tests types 'A', 'B' and 'C', in the conditions previously exposed.

Qualified Students Granted Waiver of Continuous Assessment:

To pass this subject it is necessary to obtain at least 5 points by adding the score of the 'A' and 'D' tests, under the conditions set forth in their respective sections.

ATTENDANCE TO THEORETICAL AND PRACTICAL CLASSES

Attendance at theoretical and practical classes is not mandatory, but what is taught in them will always be subject to examination.

PERFORMANCE OF CONTINUOUS ASSESSMENT TESTS

Carrying out these type 'B' and 'C' tests is not mandatory, but if they are not carried out, up to 2.5 points will be lost, which is the total value of these tests.

If these tests are carried out and the subject is not approved, its value is not saved from one course to another.

EXTRAORDINARY CALL (Minutes of 2nd edition / July)

Qualified students through continuous evaluation:

This second call will be graded as follows:

- By completing the mandatory type 'A' test.

- The qualifications of the type 'B' test are kept in this 2nd opportunity, but it will be possible, if desired, to improve this qualification, by carrying out a new machine tool programming test, which will be a test type, at the end of the type 'A' test.

- The score achieved in the type 'C' test will be maintained, but this mark can be improved if desired by means of a new written test or work, which will be similar, to be delivered on the date that is published, before the day of the call of this second edition.

To pass this subject it is necessary to obtain at least 5 points by adding the three previous tests and meeting the same minimum requirements as in the 1st edition.

The marks of the continuous evaluation tests, corresponding to 25% of the final grade, will not be kept from one course to another.

Qualified Students Granted Waiver of Continuous Assessment:

Students who do not carry out continuous assessment, because the center has accepted their resignation, must always take the type 'A' test and the type 'D' test, in the terms specified in the previous sections.

To pass this subject it is necessary to obtain at least 5 points by adding the two previous tests.

EXTRAORDINARY END-OF-CAREER CALL:

This test will be the same for all students and will consist of a type 'A' test and a type 'D' test, in the terms specified in the previous sections.

To pass this subject it is necessary to obtain at least 5 points by adding the two previous tests, fulfilling the same minimum requirements as in the ordinary calls.

ETHICAL COMMITMENT:

The student is expected to present an appropriate ethical behavior, free from fraud. In case of detecting unethical behavior (copying, plagiarism, use of unauthorized electronic devices...) it will be considered that the student does not meet the necessary requirements to pass the subject. In this case, the overall grade in the current academic year will be a fail (0.0).

Universidade de Vigo            | Reitoría | Campus Universitario | C.P. 36.310 Vigo (Pontevedra) | España | Tlf: +34 986 812 000